K2H20 Water Filter Kit

• Water Filter Kit for Kitchen Taps

Specifically developed for residential use, The K2H2O is an under sink mains water filter, consisting of a housing system and replaceable carbon wrap , filter media with optional scale reduction (Ecological).

Benefits

The K2H2O provides bottled quality filtered water from your existing kitchen tap. It reduces chlorine levels and
improves the taste and odour of the cold water from your cold tap. A filter change is only required every 6 months
(Economical) The filter has the ability to reduce lime scale. The filter is a carbon wrap system which gives a higher flow rate and lower pressure drop than traditional carbon block products.

• The K2H2O Filter housing is tested to NSF Standard 42 for microbiological safety and structural integrity. WRAS Approved hoses supplied.

  Burst Pressure of 400 PSI.

  Hydrostatic to 350 PSI for 15 mins.

  Cycle Testing from 0-150 PSI 100,000 times.

  Specifications:

  Housing Construction: FDA approved polypropylene with 10% talc

  Filter Media: Carbon wrap with polypropylene core, with phosphate

  Capacity: 28,000 litres / 7,500 USG

  Max – Minimum Operating Pressures: Min 1 bar – max 8.5 Bar or 120 PSI

  Flow Rates: 5 Litres per minute

  Micron rating: 5 micron

  Chlorine Reduction: 80% reduction in chlorine @ 2ppm over 28,000 litres / 7,500 USG

  Scale Reduction: Using 3.5gm polyphosphate beads, certified to NSF 42 Standards

  Dimensions: 220mm Wide x 220mm Deep x 330mm High